Blog/News | Techspray - Asia / Australia

How Does Ultrasonic Equipment Work?

An ultrasonic cleaning process utilizes equipment to transmit ultrasound waves, generally between 20-40 kHZ. The transducers send those sound waves through the liquid cleaner, which acts as a transfer next...

Which wipe is best with aggressive solvents?

Solvent compatibility is another factor to consider when choosing a wipe. If the wipe is to be used with a solvent in the cleaning application, then the wipe must be selected with the solvent in mind. next...

What wipe is best for rough surfaces?

Any wipe will produce particulates depending on the amount of abrasion it receives in use, so abrasion resistance should be considered. Wipes usually release the most particulates from their edges, so next...

Which wipe is best for general cleaning?

Techspray general purpose wipes (e.g. Blue Maintenance Wipes #2365-300) are meant to be used for wiping and in non-critical or controlled environments. By cleanroom standards, Techspray general purpose next...

What type of wipe is best for cleanrooms?

Cleanroom wipes used for critical applications are almost always knitted synthetic fibers. Knitted polyester fabric, like used for Techclean Purwipe (part #2355-100), is the most popular wipe material next...

Can I solder directly onto a drawn trace?

A trace drawn with the conductive ink will combine with solder, provided the soldering temperature does not exceed 350°F (177°C) and the solder joint is formed within 5 seconds. If the drawn trace next...

How do I prepare the surface for trace repair?

For optimal adhesion to most surfaces, clean the repair area prior to ink application. That insures the surface is free of oil, greases and handling soils. For precise cleaning just around the rework area, next...

How do I unclog a conductive pen?

If you experience difficulty in producing a smooth flow of conductive ink, this could indicate clogging of the product outflow channel within the tip assembly. As the pen sits in storage, especially if next...

How do you apply liquid conformal coating? (2127, 2125)

Apply to clean, moisture-free surface. Areas not requiring coating should be masked. Application: Coating may be applied by spraying, brushing, dipping or flow coating. Allow coating to flow around components. next...

How do you apply liquid conformal coating? (2104)

Apply to clean, moisture-free surface. Areas not requiring coating should be masked. Application: Coating may be applied by spraying, brushing, dipping or flow coating. Allow coating to flow around components. next...

FAQs

Ask A Technical Question

Techspray - US office

Techspray - China office

Techspray - European office

Quick Links