Home
:Categories
:Freeze Spray
:Anti-Static Freezer

Anti-Static Freezer

HFC-134a diagnostic freeze spray for static sensitive assemblies

Request A Sample

Part #	Name	Size	Units Per Case
1747-10S	Anti-Static Freezer	10 oz (284g)	12

Packaging Order minimum case quantity only. Extra shipping fees may apply.

Order from an authorized distributor

Diagnostic freeze spray for static sensitive assemblies. Rapidly evaporating liquid that super-chills isolated areas. Used as a troubleshooting aid for intermittently faulting capacitors, resistors, semiconductors, and other defective components. It also increases visibility of cold solder joints, cracks in printed circuit boards and oxidized junctions. Contains additive that avoids static build-up, critical when working with ESD-sensitive components.

Features & Benefits

Avoids static build-up
Nonflammable
Non-ozone depleting
Moisture free
Zero residue
Safe on plastics
Chills down to -60°F (-51°C)

Call-outs: Delco C00054786, HP 8500-6344, NCR 603-8001308

Applications

FAQ's

Does antistatic freeze spray (circuit chiller) leave a residue?

The alcohol additive that gives Antistatic Freeze Spray its antistatic properties evaporates completely, leaving no residue behind.

How can freeze spray (circuit chiller) avoid static build up?

Antistatic Freeze Spray is specifically formulated with dissipative properties to minimize static electricity build-up. These formulations contain additives that help conduct static charges away from the surface being cooled, reducing the risk of damaging sensitive components.

How do you use freeze spray?

For failure isolation, energize the suspect PC board. Spray on board to determine the area where the failure is occurring. Attach extension tube and spray on individual components until the failed component has been isolated.

Is there something I can do with the extension tube (straw) so it doesn’t get lost?

The aerosol trigger sprayers that are common on dusters, freeze sprays, and flux removers, have two ways to store the straw when not in use. The hole at the back of the body of the sprayer is just the right size for the straw to slide into place for storage. The slot below the trigger is also the right size for the straw to snap into place, which also has the advantage of locking the trigger.

How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.techspray.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.techspray.com/batch-codes.

More FAQs