Fine-L-Kote Conformal Coating Remover XT

Coating stripper for acrylic, silicone, urethane, and component epoxy coatings

Request A Sample
Part # Name Size Units
Per Case
2130-G Fine-L-Kote Conformal Coating Remover XT - 1 Gallon (3.8 L)   1
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Order from an authorized distributor

Fine-L-Kote Conformal Coating Remover XT is a solvent designed to remove acrylic, silicones, urethanes, and single component epoxy coatings. Ideal for use in soak application. Simply immerse the part to be cleaned into the solvent and wipe away residue. Can be used for soak applications, or with natural bristle brushes, natural fiber swabs, and wipes. Do not use foam swabs.

Fine-L-Kote Conformal Coating Remover XT is engineered to provide powerful stripping action without the use of highly toxic ingredients like MEK, methylene chloride, toluene, and xylene, which can be health hazards.

Features & Benefits

  • Strong cleaner for dissolving most common types of coatings
  • Will remove silicones, acrylics, urethanes and one component epoxies
  • Safer solvent – no MEK, xylene and other highly toxic solvents
  • Non-corrosive
  • Non-ozone depleting

FAQ's

Which conformal coating remover should I use for my coating?

The difference may be more in how they’re intended to be used rather than their relative strength. Conformal Coating Remover XT (part #2130) is slower evaporating so on larger surfaces it will probably be more effective. It will reside on the board longer and therefore able to soften, penetrate and lift coatings. Fast evaporators may not be as effective over larger areas because they would tend to evaporate too quickly and redeposit the coating. 2130 is also much lower toxicity, so safer to use when ventilation is poor. Fine-L-Kote Conformal Coating Remover (#2510) is faster and probably more tuned for smaller areas or spot removal, which is why it’s the formula offered in the pen.

How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.techspray.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.techspray.com/batch-codes.

You did not finish submitting your information to request a sample