How do you apply liquid conformal coating? (2102)

Apply to clean, moisture-free surface.  Areas not requiring coating should be masked. Application: Coating may be applied by spraying, brushing, dipping or flow coating.  Allow coating to flow around components. Cure:  A 1.0 mil coating will be tack-free in 60 minutes.  Full cure requires 72 hours @74˚F/23˚C. Heat Cure: 30 minutes @90˚F/32˚C, then 45 minutes @199˚F/93˚C. An open vessel of water placed in the drying chamber will facilitate curing. UV detectable for QC inspection. Removal:  Coating may be removed by soaking in Conformal Coating Remover. Use TraceTech™ Conformal Coating Remover Pen for spot removal. After the new component is installed, areas should be cleaned and re-coated.

You did not finish submitting your information to request a sample