Techclean Blue Maintenance Wipe
Articles
The Expert’s Guide to Degreasers & Maintenance Cleaners
What is a degreaser?
A degreaser is a cleaner designed to remove grease, oils, cutting fluids, corrosion inhibitors, handling soils, finger prints, and other contamination common in assembly, stamping, other types of metal fabrication, refineries, motor repair, airplane hangars, and many other appl...
Read This Post
Cleaning Electronics with Isopropyl Alcohol
Chemicals are found throughout the electronic assembly and repair process, but no solvent is more common than isopropyl alcohol. It is universally used for cleaning and as a main constituent of fluxes, but how much do you really know about isopropyl alcohol?
Isopropyl alcohol (CAS #67-63-0) is also...
Read This Post
Ultimate Guide to Electronic Soldering
What is soldering?
Soldering is the joining of two metal surfaces mechanically and electrically, with the use of metal called solder (pronounced “sodder”). Solder secures the connection so it doesn’t break loose from vibration, other mechanical forces and provides electrical conti...
Read This Post
How to Identify Ionic Contamination Sources in PCB Assembly
What causes PCB failure?
Whether it's a catastrophic failure or a latent field failure, nothing is more frustrating and expensive than when a circuit board stops functioning. The design was prototyped and thoroughly tested, and yet, has problems once in full production. What happened?!
I can&rsq...
Read This Post
Related products
Techclean Wiper
Class 100 high-absorbency poly/cellulose wipe - This hydroentangled cotton wipe has high absorbency with extra low particulate and chemical extractables. Recommended for ISO 146441 Class 5 (US FED STD 209E Class 100) or higher cleanrooms. Ideal for stencil cleaning.
Techclean Purwipe
Class 100 knit polyester wipe - 100% polyester wipe is a strong, lowlinting wipe that is ideal for SMT stencil cleaning and PCB rework. Class 100 cleanroom qualified
Cotton Wiper
Class 100 hydroentagled wipe made of US-grown cotton - This hydroentangled cotton wipe has high absorbency with extra low particulate and chemical extractables. Recommended for ISO 146441 Class 5 (US FED STD 209E Class 100) or higher cleanrooms. Ideal for stencil cleaning.
Techspray - US office
8125 Cobb Center Drive
Kennesaw, GA 30152, United States
Techspray - European office
ITW Contamination Control EMEA
Saffierlaan 5
2132 VZ Hoofddorp
The Netherlands
+31 88 1307 400
info@itw-cc.com
8125 Cobb Center Drive
Kennesaw, GA 30152, United States
Techspray - European office
ITW Contamination Control EMEA
Saffierlaan 5
2132 VZ Hoofddorp
The Netherlands
+31 88 1307 400
info@itw-cc.com
Techspray - China office
ITW Specialty Materials (Suzhou) Co., LTD
Suzhou, Jiangsu, CN
008651282060808
ITW Specialty Materials (Suzhou) Co., LTD
Suzhou, Jiangsu, CN
008651282060808
©2019 - ITW. All rights reserved.
You did not finish submitting your information to request a sample