Aviation 2000 Degreaser

Sku Number Name Size Units
Per Case
2859-13S Aviation 2000 13 oz (369g) 12
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Order from an authorized distributor
Quickly blast away encrusted dirt, carbonized oils, grease and Skydrol from aircraft engine housings, parts and avionic components. Can be used as an electronic contact and plug cleaner for non-energized equipment. Excellent wetting action lifts and removes soils from the tightest areas. 

Specifications: Airbus AIMS09-00-002, Boeing BSS7432, Douglas CSD No.1
Call-out: Delta Airlines 032202071
 

Features & Benefits

  • Trigger allows for greater control of spray, providing a throttling action for better controlled cleaning
  • Moderate evaporation for soak-in time
  • Zero residue
  • Low toxicity - does not contain n-propyl bromide
  • Does not contains CFCs, HCFCs or chlorinated solvents
  • Meets EU F-gas requirements
  • 360° valve sprays upside-down
  • Extension tube included for pin-point accuracy

FAQ's

How do you know the safe exposure limit of a degreaser, contact cleaner, or flux remover?

The personal hazard associated with a solvent is often defined using Threshold Limit Value (TLV), which is the recommended average exposure in an 8-hour day, 40 hour work week. The lower the TLV of a particular substance, the less a worker can be exposed to without harmful effects. TLV is stated on the SDS of chemical products, in additional to recommended personal protection equipment (or PPE). The threshold limit value of a solvent is generally set by the American Conference of Governmental Industrial Hygienists (ACGIH). The unit of measure is Parts Per Million (PPM).

How do you use an aerosol cleaner?

Hold object to be cleaned in vertical position. Pull trigger gently to control solvent flow rate. Scrub with brush from top to bottom, allowing the liquid to flush away contaminants. 

How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.techspray.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.techspray.com/batch-codes.

You did not finish submitting your information to request a sample