PWR-4 Solvent 3410

Heavy-duty, cost effective degreaser

Part # Name Size Units
Per Case
3410-G PWR-4 Solvent 3410 - 1 gal 1 gal (3.8L) 1
3410-5G PWR-4 Solvent 3410 - 5 gal 5 gal. 1
3410-54G PWR-4 Solvent 3410 - 54 gal 54 gal (205L) 1
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Order from an authorized distributor

Ideal Replacement for Novec 71DE, 72DA, 72DE & 73DE

PWR-4™ Solvent 3410 is ideal where a safer, non-flammable, and cost effective cleaner is required. This innovative solvent is much safer than the four most common industrial solvents: TCE, nPB, Perc and Methylene Chloride and quickly cleans the most difficult baked-on R, RMA & no-clean fluxes from electronic assemblies.

PWR-4 Solvent 3410 has azeotrope properties that allow it to maintain stable properties as it is cycled in a vapor-degreaser. It is neither reactive nor corrosive to metals commonly found in the construction of vapor-degreasers.

Removes oils, greases, silicones, refrigerant oils, fluxes, adhesives and other common industrial contaminants. Used for cleaning medical instruments, implants and other devices including orthopedic implants, and monitoring devices. 

  • High performance replacement for Novec 71DE, 72DE & 73DE solvents
  • Nonflammable
  • Much safer than most common industrial solvents — TCE, nPB, Perc & Methylene Chloride
  • Powerful cleaner — Ideal for heavy greases
  • Available in bulk for vapor-degreasing, ultrasonic and immersion cleaning
  • Rapid evaporation
  • Non-ozone depleting
  • Specifications: Airbus AIMS09-00-002, Boeing BSS7432

 


Vapor Degreaser Setting Guidelines

  • Boiling point – 118°F / 48°C
  • Boil sump temp set – 127°F / 53°C  
  • High solvent temp set – 136°F / 58°C
  • Refrigerant high temp set – 109°F / 43°C

Note: As with all vapor degreaser equipment and processes, observe all safety precautions, guidelines and operating rules associated with these units. Failure to do so may put operations personnel at risk. Avoid excessive vapor losses, loss of refrigeration, excessive boil sump heat, etc. Make sure all equipment is operated in accordance with the manufacturer’s guidelines and instructions. If in doubt, contact your manufacturer immediately.


FAQ's

HOW DO I IDENTIFY AND QUALIFY A 3M NOVEC REPLACEMENT?
For a step-by-step guide to qualifying 3M replacements, see our article (click title)7 Tips for Qualifying 3M Novec Replacement Vapor Degreaser Solvents”.
WITH A 2025 PHASE-OUT, WHY REPLACE 3M NOVEC NOW?

End-users that want to maintain control of their supply of high precision solvents for their critical cleaning needs should start the process of identifying and qualifying replacements as soon as possible. The alternative would be operating at the whims of global demand on a very restricted supply.

Is 3M discontinuing Novec solvents?

On December 20, 2022, 3M announced their plans to phase-out their Novec PFAS-based product lines by the end of 2025:

“3M today announced it plans to exit per- and polyfluoroalkyl substance (PFAS) manufacturing and work to discontinue use of PFAS in its product portfolio by the end of 2025. This portfolio decision is based on careful consideration and a thorough evaluation of the external landscape, including multiple factors such as accelerating regulatory trends focused on reducing or eliminating the presence of PFAS in the environment and changing stakeholder expectations.”

You did not finish submitting your information to request a sample