Home
:Categories
:PFAS Free Alternatives
:TraceTech Flux Remover Pen

TraceTech Flux Remover Pen

Spot cleaning for PCB rework and repair

Request A Sample

Part #	Name	Size	Units Per Case
2506-N	Flux Remover Pen	10.5 ml	12

Packaging Order minimum case quantity only. Extra shipping fees may apply.

Order from an authorized distributor

Provides convenient touchup cleaning of flux residues. Cleans R, RMA, SA, and noclean fluxes.

Features & Benefits

Safe on plastics
Cleans lead and lead-free flux residues
Rapid evaporation
Pen tip allows controlled application
Non-ozone depleting

Applications

Electronic Repair

FAQ's

When should I clean off no-clean flux when soldering?

If it is not fully activated (brought up to solder temperature), you should not leave any ionic residue behind. You might have to clean if...
1. Flux is being used so liberally that it all isn’t being heated along with the solder.
or
2. The non-ionic residue can impede with the function of the devise either short-term or long-term.

How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.techspray.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.techspray.com/batch-codes.